World’s first fully 3D-printed building

World’s first fully 3D-printed building

Updated on 28/05/2016: Watch the video below

Dubai has opened what it said was the world’s first functioning 3D-printed office building, part of a drive by the Gulf’s main tourism and business hub to develop technology that cuts costs and saves time.




The one-storey prototype building, with floor space of about 250 square meters (2,700 square feet), used a 20-foot (6-metre)by 120-foot by 40-foot printer, the government said.

Sheikh Mohammed bin Rashid Al Maktoum, Vice President and Prime Minister of the UAE and Ruler of Dubai, inaugurated the 3D-printed office building in a ceremony on Monday attended by a number of UAE dignitaries. Named the “Office of the Future,” the 3D-printed building, built in 17 days and costing about $140,000, is located on the Emirates Towers premises and will be the temporary home of the Dubai Future Foundation.




“We announce today the opening of the first 3D-printed office in the world, after less than one month of launching Dubai 3D printing strategy which showcases a modern model of construction. This is an experience we present to the world on utilizing future technology in people lives. It also represents a new milestone for the UAE as a global leader in strategic achievements,” Sheikh Mohammed said.




The 3D-printed building has all the amenities of traditionally constructed structures, such as electricity, water, telecommunications, and air conditioning. The office is also outfitted with a number of energy saving features, including window shades to protect from Dubai’s blazing sun. In order to create all the pieces needed for the office, builders used a 3D printer measuring 20 feet high, 120 feet long, and 40 feet wide. Aside from the equipment, it took a very small team of workers to put the office together. Seven installers and 10 electricians and specialists worked together to assemble the fully functional office in just 17 days. Dubai’s media office estimates this represents a 50 percent cost savings in labor alone compared to buildings of similar size built with conventional methods.




Mohamed Gergawi, the United Arab Emirates Minister of Cabinet Affairs, said studies estimated the technique could cut building time by 50-70 percent and labor costs by 50-80 percent. Dubai’s strategy was to have 25 percent of the buildings in the emirate printed by 2030, he said.



Posts you may also like:
Light Emitting Cement
What is the structure that leans westward a full 18 degrees ?
When Belgium try to ignore the GRAVITY
UAE Wants More Rain… So It’s Building a Mountain !

Post Author: Zahi Baroudi

One thought on “World’s first fully 3D-printed building

Leave a Reply

Your email address will not be published. Required fields are marked *